Premier DS-5060S ユーザーガイド

Refer to the symptoms and solutions listed below before sending the camera for 
repairs. If the problem persists, contact your local reseller or service center.

The power does not 
come on.

The batteries are not loaded.

Load the batteries correctly.

The batteries are exhausted.

Replace with a new set of 
batteries.
Please use only Alkaline or Ni-MH 
rechargeable batteries.

The batteries or cam-
era feels warm.

Long period of continuous use 
of the camera or the flash.

The start-up screen 
blinks after powering 
up.

The rechargable batteries have 
reached their effective life. 

Replace with a new set of  
rechargable batteries.

The recorded video 
clips do not have 
sound.

This camera does not have a 
built-in microphone. Audio 
function is not available.

Even if I press the 
shutter button, the 
camera does not 
shoot.

The shutter button is not 
pressed all the way down.

Press the shutter button all the 
way down.

The internal memory or 
memory card does not have 
any free capacity.

Insert a new memory card, or 
delete unwanted files.

The flash is charging.

Wait until the status LED turns 
green.

The memory card is 
write-protected.

Remove the write-protection.

The camera cannot 
focus.

The lens is dirty.

Wipe clean with a soft, dry cloth 
or lens paper.

The distance to the subject is 
smaller than the effective range.

Get your subject within the effec-
tive focus range.

Files cannot be 
deleted.

The file is protected.

Cancel protection.

The memory card is 
write-protected.

Remove the write-protection.

Cannot download 
images.

The free space on the hard disk 
in your computer may be 
insufficient.

Check whether the hard disk has a 
space for running Windows, and if 
the drive for loading image files has 
a capacity at least that of the 
memory card inserted in the 
camera.