Samsung Digimax S860 ユーザーガイド

ページ / 94
02 RECORDING
37
RECORDING_
Using the Custom White Balance
White balance settings may vary slightly depending on the shooting 
environment. You can select the most appropriate white balance set-
ting for a given shooting environment by setting up the custom white 
balance.
 1.  Select the CUSTOM ( Å ) menu of 
the White Balance and place a sheet 
of white paper in front of the camera so 
that the LCD monitor shows only white.
 2.  MENU/OK button :  selects previous 
custom white balance.
 Shutter button 
:  saves new custom white balance.
- The custom white balance value will be applied, starting with the 
next picture you take.
- The user confi gured white balance will be remain effective until it is 
overwritten.
Exposure compensation
This camera automatically adjusts the exposure according to the ambi-
ent lighting conditions. 
You can also select the exposure value by using the Fn button.
 Compensating Exposure
 1.  Press the Fn button, and then use the UP 
and DOWN buttons to select the exposure 
compensation icon ( Â ). 
 2.  Use the LEFT and RIGHT buttons to set the 
desired exposure compensation factor.
 3.  Press the OK or Fn button. 
The value you set will be saved and the 
Exposure Compensation setup mode will be closed. If you change 
the exposure value, the exposure indicator ( Â ) will be displayed 
on the bottom of the LCD monitor.
Ä
A negative exposure compensation value reduces the exposure. 
Note that a positive exposure compensation value increases the 
exposure and the LCD monitor will appear white or you may not get 
good pictures.
EV
White balance 
White paper