Comp X Security Products Inc 421860 ユーザーズマニュアル
CHANGING OIL AND OIL FILTER:
FLHTCUSE3
FLHTCUSE3
Do not switch lubricant brands indiscriminately because
some lubricants interact chemically when mixed. Use of
inferior lubricants can damage the engine. (00184a)
some lubricants interact chemically when mixed. Use of
inferior lubricants can damage the engine. (00184a)
Twin Cam equipped motorcycles require the premium oil filter
(Part No. 63798-99A Chrome or Part No. 63731-99A Black).
(Part No. 63798-99A Chrome or Part No. 63731-99A Black).
Refer to Table 32. Oil should be changed after the first 1000
miles (1600 kilometers) for a new engine and at regular inter-
vals in normal service at warm or moderate temperatures.
miles (1600 kilometers) for a new engine and at regular inter-
vals in normal service at warm or moderate temperatures.
1.
Ride motorcycle until engine is warmed up to normal
operating temperature. Turn engine off.
operating temperature. Turn engine off.
2.
Locate oil filler plug/dipstick on right side of vehicle at top
of transmission case. Unthread cap to remove the oil filler
plug/dipstick.
of transmission case. Unthread cap to remove the oil filler
plug/dipstick.
3.
See Figure 50. Locate oil drain plug at front left side of the
oil pan. Remove the oil drain plug. Do not remove the allen
plug. Allow oil to drain completely.
oil pan. Remove the oil drain plug. Do not remove the allen
plug. Allow oil to drain completely.
1
2
om00311
1.
Transmission drain plug (right side)
2.
Engine oil drain plug and o-ring
Figure 46. Oil Pan
140 Maintenance and Lubrication