Comp X Security Products Inc 421860 ユーザーズマニュアル

ページ / 117
JUMP STARTING
Harley-Davidson does not recommend jump-starting a motor-
cycle. However, there may be circumstances when it is neces-
sary to do so. Therefore, we suggest jump-starting be per-
formed as follows:
Be sure jumper cables touch only appropriate battery ter-
minals or ground. Allowing jumper cables to touch each
other can result in sparks and a battery explosion, which
could result in death or serious injury. (00072a)
Explosive hydrogen gas, which escapes during charging,
could cause death or serious injury. Charge battery in a
well-ventilated area. Keep open flames, electrical sparks
and smoking materials away from battery at all times.
KEEP BATTERIES AWAY FROM CHILDREN. (00065a)
Harley-Davidson motorcycles have a 12 Volt battery. Be
sure the booster vehicle has a 12 Volt system. Failure to
do so could result in vehicle damage. (00220a)
NOTE
This procedure presumes the BOOSTER battery is in another
vehicle.
1.
Turn off all unnecessary lamps and accessories.
Positive Cable
2.
See Figure 69. Connect one end of a jumper cable to the
DISCHARGED battery positive (+) terminal (1).
3.
Connect the other end of the same cable to the BOOSTER
battery positive (+) terminal (2).
Negative Cable
Do not connect negative (-) cable to or near the discharged
battery negative (-) terminal. Doing so could cause a spark
and explosion, which could result in death or serious
injury. (00073a)
4.
Connect one end of a jumper cable to the BOOSTER
battery negative (-) terminal (3).
182   Maintenance and Lubrication