Daviscomms Pte Ltd BU10 ユーザーズマニュアル
7.3 RF Channel
Occasionally, due to external interference, it may be necessary to switch the channel of operation for the Tag(s)
and the Base.
Occasionally, due to external interference, it may be necessary to switch the channel of operation for the Tag(s)
and the Base.
Step 1: From Advance Settings Menu > Select RF Channel.
Step 2: Select Yes to proceed to change the channel.
Step 2: Select Yes to proceed to change the channel.
Or
Select No to return to previous screen without any changes made.
Note: Tags need to be re-associated to the Base after a new channel is selected.
Select No to return to previous screen without any changes made.
Note: Tags need to be re-associated to the Base after a new channel is selected.
Step 3: Select the channel (Channel 1 to 3) which you prefer by pressing
and and select OK to confirm.
Or
Select Back to return to previous screen without any changes.
Select Back to return to previous screen without any changes.
Step 4: Select Done to stop searching for Tag/Tags; unregister all tags and return to the main screen.
Note: Once a new channel is entered, the Base will proceed to unregister from all Tags and return to the
main screen (no association).
Ensure that Tags which are out of range are properly unregistered by removing the battery.
main screen (no association).
Ensure that Tags which are out of range are properly unregistered by removing the battery.
Page 24