Selex ES SPA F567DHDE-HP ユーザーズマニュアル
SELEX Communications
Information contained in this document may not be used, applied or reproduced for any purpose unless agreed
by SELEX Communications S.p.A. in writing
59
July 2010
D-SUB HD 15 female pinout
PIN
Mean
1 GND
Ground
2 AF FO
Audio Frequency Output (no volume)
3
not
used
4 AF out -
Audio Frequency output from RBS
5
not
used
6 AF in
Audio Frequency input to RBS
7
not
used
8
not
used
9
not
used
10 AF out + Audio Frequency output from RBS
11 PTT
11 PTT
Push To Talk input to RBS
12
not
used
13 DGND Digital
Ground
14
not
used
15 VDD
(soldering side view)
7.7 Remote Maintenance Interface
The Remote maintenance interface may be accessible directly or not on each RBS depending on the
configuration of the system.
If the RBS is configured to be remotely controlled via the LAN interface, see the LAN interface section
to correctly connect the RBS.
For more information about the remote maintenance procedure see the Network Management System
(NMS) Manual, where supplied.