Selex ES SPA F867DHDE-H ユーザーズマニュアル
SELEX Communications
Information contained in this document may not be used, applied or reproduced for any purpose unless agreed
by SELEX Communications S.p.A. in writing
56
July 2010
8.3 Module removal
To remove a module from the RBS follows the procedure described below.
1 – Unscrew the two (or four) screws marked in red on the front panel of the module
2 – From the front side of the RBS using the handle marked in blue pull the module out.
Module locking screws
Module handles