Selex ES SPA F867DHDE-H ユーザーズマニュアル
SELEX Communications
Information contained in this document may not be used, applied or reproduced for any purpose unless agreed
by SELEX Communications S.p.A. in writing
8
July 2010
3.
Technical/Environmental Specification
The main characteristic of the device are:
Radio Frequency
:
Frequency range
400 – 470 MHz
Channel Spacing
12,5 – 25 kHz
Channel step
5 kHz – 6,25 kHz
RF Power
2 – 25 Watt (step 0,1 dB)
Modulation type
Dual mode
Analog FM/PM (EN 300 086 – EN 300 113)
11K0F3E/11K0G3E
16K0F3E/16K0G3E
Digital 4FSK (TS 102 361-1,2,3)
7K60FXD/7K60FXE
C4FM
8K10F1D/8K10F1E
CTCSS
67 – 254.1 Hz (step 0,1 Hz)
DCS
yes
Antenna connector
50 Ohm
Emission mode
Duplex/Simplex
Receiver sensitivity
Analog FM (12,5 kHz): ≤ -112 dBm @ 20 dB SINAD psofo
Digital 4FSK: ≤ -118 dBm @ BER = 5x10
-2
Digital C4FM: ≤ -118 dBm @ BER = 5x10
-2
Power supply
:
Input voltage
48 Vdc (35 ÷ 75 Vdc - galvanically insulated)
Environmental condition
:
Operating temperature
-30 - +60 °C (-22 - +140 °F)
This is the temperature measured in close proximity to the
device. If the device is mounted in a cabinet, the temperature
within the cabinet is measured.