Ingenico IWL2XXBCL ユーザーズマニュアル
iWL2xx Wireless Series
•
9/32
Copyright © 2011 Ingen ico
900003061 R11 000 04/1050
All rights reserved
Contactless (optional)
•
Bring the card firmly up to the active zone. Keep the
card close to the reader during the transaction
card close to the reader during the transaction
•
The 4 LEDs indicate transaction processing (as shown
on the picture) . On color screen terminal virtual LEDs
are displayed.
on the picture) . On color screen terminal virtual LEDs
are displayed.
The terminal behavior for the cardholder may depend on:
•
The terminal environment
•
Local usage (language…)
3.4.
Installing the terminal on the base
Connecting the terminal on the base
Place the iWL2XX between the flanges on its base so that the contacts of the iWL2XX
engage on the contacts provided on the base (see picture below).
engage on the contacts provided on the base (see picture below).
Using the modem base (if modem fitted on your base)
Once installed, the base modem is designed to always be plugged into the mains network
and be connected to a telephone line. The telephone line should not be shared.
The portable may be placed back on its base after each transaction. It must be placed on its
modem base when telephone network is used for : authorization request, remote
collection, downloading.
and be connected to a telephone line. The telephone line should not be shared.
The portable may be placed back on its base after each transaction. It must be placed on its
modem base when telephone network is used for : authorization request, remote
collection, downloading.
4 leds
(B&W display only)
(B&W display only)
Active
zone
zone
iWL2xx Wireless Series
•
10/32
Copyright © 2011 Ingen ico
900003061 R11 000 04/1050
All rights reserved
4.
Installation
4.1.
Recommendations
Location of the iWL2xx
Place the base on flat surface near an electric socket and, if modem option, a telephone
socket. The terminal should be placed far from any very hot zones, protected from
vibrations, dust, damp and electromagnetic radiation (computer screen, anti-theft barrier
etc.).
The terminal must not be fixed to a counter in such a way that a user cannot pick up the
terminal and use his/her body to conceal the PIN when it is requested.
socket. The terminal should be placed far from any very hot zones, protected from
vibrations, dust, damp and electromagnetic radiation (computer screen, anti-theft barrier
etc.).
The terminal must not be fixed to a counter in such a way that a user cannot pick up the
terminal and use his/her body to conceal the PIN when it is requested.
Operating conditions
Ambiant temperature
from -10°C to +40°C
Max relative humidity
85% at +40°C
Charging conditions
Ambiant temperature
from 0°C to +40°C
Storage conditions
Ambient temperature
from -20°C to +55°C
Max relative humidity
85% at +55°C
4.2.
Terminal connections
•
There is an USB connector (microAB) on the left side of the iWL2XX Wireless
terminal (see below picture). This connector manages Host or Slave connexions.
*MicroAB connector durability : up to 10000 mating cycles
•
The terminal supports USB Keys with FAT16 or FAT32
•
The USB Key has to be used with an USB adapter (refers to accessories section)
USB (microAB)
Connector used for PC,
travel charger adapter, USB
Key, etc…)
Connector used for PC,
travel charger adapter, USB
Key, etc…)