Industrial Technology Research Institute 00000UHFISTC01 ユーザーズマニュアル
User Manual Document
Document Title
Doc. No.
Model Ver. Doc. Ver. Issue Date
Page
Handfree Mini Reader
Module
1.0
ISTC01
1.0
09/14/2009
6 of 10
4 System Specification
Reader is mainly used to read the materials from tag to carry on the work of
distinguishing of the things with PDA or the cell-phone. When PDA or the
cell-phone assigns the order for Reader, reader will transmit RF wave with data out
through antenna. Once tags are receiving the information, the tag will backscatter
the data with 96-bit EPC C1G2 protocol to Reader through RF mechanism that is
built inside. Reader receives after the data that will give PDA or the cell-phone the
work of distinguishing which carries on the things.
cell-phone assigns the order for Reader, reader will transmit RF wave with data out
through antenna. Once tags are receiving the information, the tag will backscatter
the data with 96-bit EPC C1G2 protocol to Reader through RF mechanism that is
built inside. Reader receives after the data that will give PDA or the cell-phone the
work of distinguishing which carries on the things.
For the wired RS232 interface of entity among PDA, cell-phone and readers,
the industrial communication protocols are interchanging in order to reach the data.
It is depending on the untouchable RF wave between reader and tag to reach the
data to interchange with the communication protocol that is defined by EPC
C1G2。
It is depending on the untouchable RF wave between reader and tag to reach the
data to interchange with the communication protocol that is defined by EPC
C1G2。