Ablecom Technology Inc. HE130S2 ユーザーズマニュアル
5
Regulations
This device has been tested and found to
comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This device generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This device generates,
uses, and can radiate radio frequency energy
and, if not installed and used in accordance
with the instructions, may cause harmful
interference to radio communications.
FCC Statement
However, there is no guarantee that
interference will not occur in a particular
installation. If this device does cause harmful
interference to radio or television reception,
which can be determined by turning the device
off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
interference will not occur in a particular
installation. If this device does cause harmful
interference to radio or television reception,
which can be determined by turning the device
off and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the device
and receiver.
and receiver.
-
Connect the device into an outlet on a circuit
different from that to which the receiver is
connected.
different from that to which the receiver is
connected.
-
Consult the dealer or an experienced
radio/television technician for help.
radio/television technician for help.
Shielded network cable must be used between
network hub and client in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules
network hub and client in order to comply with
the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules
This equipment should be installed and
operated with a minimum distance of 20
centimeters be between the radiator and your
body.
operated with a minimum distance of 20
centimeters be between the radiator and your
body.
Any changes or modifications (including the
antennas) made to this device that are not
expressly approved the manufacturer may void
the user’s authority to operate the equipment.
antennas) made to this device that are not
expressly approved the manufacturer may void
the user’s authority to operate the equipment.
Precautions
-
Internal part is hazardous moving parts;
please keep fingers and other body parts
away.
please keep fingers and other body parts
away.
For Safety
-
For every change in power cord’s usage,
please use an approved power cord with
condition greater or equal to H05VV-F, 3G,
and 0.75mm.
please use an approved power cord with
condition greater or equal to H05VV-F, 3G,
and 0.75mm.
For Power Sources
-
Do not disable the protective earth pin from
the plug; the equipment must be connected
to an earthed mains socket-outlet.
the plug; the equipment must be connected
to an earthed mains socket-outlet.
-
For pluggable equipment, the socket-outlet
shall be installed near the equipment and
shall be easily accessible.
shall be installed near the equipment and
shall be easily accessible.
For Placement
-
Adjustment of the volume control as well as
the equalizer to other settings than the center
position may increase the ear-/ headphones
output voltage and therefore the sound
pressure level.
the equalizer to other settings than the center
position may increase the ear-/ headphones
output voltage and therefore the sound
pressure level.