IBM ServeRAID-BR10il 44X0411 ユーザーズマニュアル

ServeRAID-BR10il SAS/SATA Controller v2 for IBM System x

1

������

 

®

The ServeRAID-BR10il SAS/SATA Controller v2 is an ideal solution for servers that need high-speed data 

transfer in disk connectivity for data backup and mission-critical applications. The controller is a low-cost 
PCI Express x4 adapter with support for RAID 0, 1, and 1E. It provides the flexibility to use both SAS and 
SATA hard drives. The ServeRAID-BR10il SAS/SATA Controller v2 comes in a standard form factor and 
is ideal for supporting HDDs in a space-constrained server configuration.  

Figure 1 shows the ServeRAID BR10il SAS/SATA Controller v2.

Figure 1. ServeRAID-BR10il SAS/SATA Controller v2

Did you know?

When used in servers such as the x3200 M3 and x3250 M3, the ServeRAID-BR10il SAS/SATA Controller 

v2 is installed in a dedicated PCI Express slot on the system board. This means that the standard PCI 
Express slots are available for other adapter cards.

The ServeRAID-BR10il SAS/SATA Controller v2 is an inexpensive way to implement RAID functionality 

and supports RAID arrays comprised of SAS drives or SATA drives.