CCS Schweiz AG KEVIN-TAG ユーザーズマニュアル
Kevin, the mobile alarm system V. 1.0
page 11 / 17
However, if the alarm can not be
reached by radio and therefore fails to
turn off, the LED continues to blink on
the HANDSET to remind the user that
the ALARM UNIT could not be turned
off. After 30 seconds, the HANDSET
completely shuts off automatically to
save battery power.
Should there be no response to a
triggered alarm within 12 minutes, the
ALARM UNIT turns off the alarm
automatically.
reached by radio and therefore fails to
turn off, the LED continues to blink on
the HANDSET to remind the user that
the ALARM UNIT could not be turned
off. After 30 seconds, the HANDSET
completely shuts off automatically to
save battery power.
Should there be no response to a
triggered alarm within 12 minutes, the
ALARM UNIT turns off the alarm
automatically.
Useful
when
the
ALARM UNIT was checked in at the
airport in an active mode by mistake.
Information
airport in an active mode by mistake.
Information
about
the
power
consumption: the batteries don’t need
to be removed from the units even at
a long period of non use. The system
features a power saving mode that is
activated automatically after 14 hours.
During activation, the battery voltage
is being measured in both devices
and if necessary an audible warning
(error message) is emitted by the
respective device.
6. Error indication
Audible signals and their meanings:
E1: When activated, a continuous
modulated tone is heard for a few
seconds: ALARM UNIT may not be
reached by radio.
to be removed from the units even at
a long period of non use. The system
features a power saving mode that is
activated automatically after 14 hours.
During activation, the battery voltage
is being measured in both devices
and if necessary an audible warning
(error message) is emitted by the
respective device.
6. Error indication
Audible signals and their meanings:
E1: When activated, a continuous
modulated tone is heard for a few
seconds: ALARM UNIT may not be
reached by radio.