Cubic Global Tracking Solutions MDC2 ユーザーズマニュアル
Cubic Global Tracking Solutions
Page 4 of 14
315001v4
Copyright © 2015 CGTS
10/14/15
Regulatory Compliance
FCC STATEMENT:
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his/her own
expense.
energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to correct the interference at his/her own
expense.
Changes or modifications not expressly approved by Cubic Global Tracking Solutions for compliance
could void the user’s authority to operate the equipment.
could void the user’s authority to operate the equipment.
The antennas used for this transmitter must be installed to provide a separation distance of at least
20cm from all persons during normal device operation and must not be located or operating in
conjunction with any other antenna or transmitter.
20cm from all persons during normal device operation and must not be located or operating in
conjunction with any other antenna or transmitter.
Les antennes utilisées pour cet émetteur doivent être installés pour fournir une distance de séparation
d'au moins 20cm de toutes les personnes en cours de fonctionnement normal du dispositif et ne doit
pas être situé ou opérant dans conjointement avec une autre antenne ou émetteur.
d'au moins 20cm de toutes les personnes en cours de fonctionnement normal du dispositif et ne doit
pas être situé ou opérant dans conjointement avec une autre antenne ou émetteur.
Industry Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.