ABUS FU8350 プリント

ページ / 2
ABUS Security-Center
FU8350
Secvest 2WAY Wireless Motion Detector
Product highlights:
•  Passive infrared motion detector for indoors
•  Detects moving body heat
•  Monitors entire rooms
•  90° field of view, ideal for installation in corners
•  Wireless installation
The wireless motion detector is a component of the Secvest 2WAY
and is also suitable for the Terxon with a wireless expansion module.
The passive infrared (PIR) motion detector detects moving body heat
and reports it to the alarm control panel. The ideal installation place
for the wireless motion detector is directly at the wall, up to 2.4
meters above the floor, in one of the room’s corners. Any place that
is exposed to a heat source (e.g. radiator) or a window is not suitable
for installation. Likewise, do not install your motion detector in the
immediate vicinity of power cables, gas lines or electronic devices,
which generate heat when operated for long periods. A fax machine,
for example, can generate heat in your absence and trigger a PIR
motion detector. 
The angle of view of the wireless motion detector is 90 degrees; its
detection range is up to 15 meters, depending on the elevation at
which it is installed. In addition, it is equipped with creep zone
coverage. The creep zone coverage prevents anyone from creeping
underneath the detector without being
detected.
© 2011 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.