Edgecore Networks Corporation SMCWBR14SN5 ユーザーズマニュアル
C
HAPTER
4
| Configuring the Router
Wireless
– 57 –
W
IRELESS
S
ETTINGS
Choose menu Wireless -> Wireless Setting; you can configure the basic
settings for the wireless network on this page.
The wireless settings section displays configuration settings for the access
point functionality of the Wireless AP/router. It includes the following
sections:
Figure 46: Wireless Settings
◆
SSID - Enter a value of up to 32 characters. The same SSID (Service
Set Identification) must be assigned to all wireless devices in your
network. The default SSID is set to be “SMC”. This value is case-
sensitive. For example, “TEST” is NOT the same as “test”.
◆
SSID (2-4) - Up to four SSIDs for each BSS can be set, the names can
be up to 32 characters. The multi-SSID function is available only when
Enable is checked.
◆
Region - Select your region from the pull-down list. This field specifies
the region where the wireless function of the Router can be used. It
may be illegal to use the wireless function of the Router in a region
other than one of those specified in this field. If your country or region
is not listed, please contact your local government agency for
assistance.
When you select your local region from the pull-down list, click the
Save button, then the Note Dialog appears. Click OK.