Shenzhen Anbash Technology Co. Ltd. NC335SPW ユーザーズマニュアル
63
6.8.3 Schedule Setup
The alarm that the motion detection triggers can be set to be active or inactive at certain times of the week.
By default, the schedule is set to be “active” at all times “always”.
However you can set the schedule not to trigger alarms at certain times (useful for instance if you don’t want
alarms to go off while your office is open from 9am until 5.30pm). You can set up to 4 schedules, and you
can use these to send alarms to different places – such as emails, FTP or SD card.
alarms to go off while your office is open from 9am until 5.30pm). You can set up to 4 schedules, and you
can use these to send alarms to different places – such as emails, FTP or SD card.
Schedule Setup Options
[Schedule ID] Select the ID, you can save up to 4 schedules and use them for different purposes.
[No.] Setup the specified times in every Schedule ID, you can save up to 8 specified times and use
them for different purposes.
them for different purposes.
[Enable] Activates the alarm on specified times. Ticking this box to activate the alarm on the specified
times. [Start time] Start time of the alarm.
times. [Start time] Start time of the alarm.
[End time] End time of the alarm.
[Days] Ticking this box activate the alarm daily on the specified times from Monday to Sunday.
Click Apply to confirm your setting