Zonoff Inc. EMBY001 ユーザーズマニュアル

Before connecting the TaHomA controller to the router or powering it up, confirm that the site has a healthy and active internet 
connection and a stable LAN. 

In addition, the TaHomA controller should be centrally located to as many Z-Wave devices as possible to ensure the best system 
performance. However, please keep in mind that the maximum recommended length of an Ethernet cable is 100 meters For more 
information on TaHomA controller placement, refer to 

Section 1.1 of this guide.

1.  Connect the Ethernet cable to TaHomA and the router. 

2.  Connect the included power adapter to TaHomA first, then plug into a standard 120VAC outlet.

3.  Confirm Ethernet port LED is solid green, indicating an active network connection.

NOTE: This process may take up to several minutes. Do not disconnect the power or Ethernet connection during this time. 

TaHomA Setup and Registration 

cont’d

1.  Left LED will blink green and then remain solid. This may take a few moments. The Middle and Right LEDs will remain unlit.

2.  The Middle LED will then illuminate solid green when the TaHomA software is running.

3.  The Right LED will then illuminate solid green when TaHomA has connected to the external Remote Access Server (RAS).

When all 3 LEDs are solid green, you may continue with login creation and End User registration. If the controller does 
not display 3 solid green LEDs, please contact TaHomA Technical Support either through the TaHomA Dealer Support portal 
accessed by logging in at www.somfytahoma.com or by calling 866-MYTAHOMA (866.698.2466). Refer to page 77 for 
more technical support information.

NOTE: Periodically,

 

TaHomA will download and install system updates.

 

This is indicated by the 1

st

 and 2

nd

 LEDs blinking 

amber and blue. Do not disconnect the power or Ethernet connection during this time.

TaHomA Setup and Registration 

cont’d