Zonoff Inc. EMBY001 ユーザーズマニュアル

1.  Select the motion sensor you would like to program. The Trigger Editor window will appear. 

NOTE: During first time setup, clicking on the motion sensor’s icon will bring up the Initialize Device window. Click
“Initialize” and after the initialize sequence is complete, proceed to the next step.

2.  In the Trigger Editor window there will be a drop down menu next to each Trigger with available Scene options. Choose 

a Scene for each Trigger.

3.  Click on the gear icon next to a drop down menu to access advanced options. You can select days of the week, specific

activation times, or conditions (anytime, before, after, between).

4.  Once you have completed your selection, click “close”. Your selections will automatically be saved.

NOTE: Remember to adjust the Timing Mode Selector Switch on each motion sensor. Choose from pulse, 5 minute delay, 10 
minute delay, or 15 minute delay. 

If you are interested in utilizing TaHomA’s “Home Occupancy” feature, refer to the instructions in the Advanced 
Features section of this guide.

Programming Instructions 

cont’d

The 

Schedule Configurator is where you set Scenes to automatically activate at a specific time of day, days of the week, or block of 

dates.

1.  In the Schedule Configurator, click the “+” button in the upper right hand corner to create a new Schedule.

2.  Enter a name for the Schedule in the text box and click “create.”

Programming Instructions 

cont’d