Panoramic Power ltd. PAN-4-2 ユーザーズマニュアル
PAN-42 User Guide
6
Under no circumstances should PAN-42 be connected to a power source if
it is damaged.
it is damaged.
To prevent potential fire or shock hazard, do not expose PAN-42 to rain or
moisture.
moisture.
Ensure that the external current transformers are shorted (by using the
recommended shorting switches) before disconnecting PAN42 from its
current inputs.
recommended shorting switches) before disconnecting PAN42 from its
current inputs.
The sensor and CTs should be installed and removed only by a qualified
electrician. Read this manual thoroughly before connecting the device to the
current-carrying circuits.
electrician. Read this manual thoroughly before connecting the device to the
current-carrying circuits.
During operation of the device, hazardous voltages are present on input
terminals. Failure to observe precautions can result in serious or even fatal
injury, or damage to equipment.
terminals. Failure to observe precautions can result in serious or even fatal
injury, or damage to equipment.
Mechanical Installation
There are several mounting options for PAN-42:
On a 35-mm DIN rail (see the drawing below)
By using screws, using the slots on the back of the device
With plastic tie-wraps, using the hooks on the back of the device