MitraStar Technology Corporation DSL2401HNAT1CC ユーザーズマニュアル
4
Chapter
Chapter 4 Wireless 2.4GHz
28
C
HAPTER
4
Chapter 4
Wireless 2.4GHz
4.1 Wireless General Screen
Use this screen to enable the Wireless LAN, enter the SSID and select the wireless security mode.
If you are configuring the Router from a computer connected to the wireless LAN and you
change the Router’s SSID or security settings, you will lose your wireless connection when
you press Apply to confirm. You must then change the wireless settings of your computer
to match the Router’s new settings.
Click Network Setting > Wireless 2.4GHz to open the General screen. Select the Enable Wireless
LAN check box to show the Wireless configurations.
Figure 13 Network Setting > Wireless 2.4GHz > General