MitraStar Technology Corporation DSL2401HNAT1CC ユーザーズマニュアル

Table 18   Network Setting > Wireless 5GHz > General 

Wireless

Select the Enable Wireless LAN check box to activate the wireless LAN.

Wireless 

Network Name 

(SSID)

Enter a descriptive name for the wireless LAN. 

Hide SSID

Select this check box to hide the SSID in the outgoing beacon frame so a station cannot 

obtain the SSID through scanning using a site survey tool.

BSSID

Client Isolation

Select this to keep the wireless clients in this SSID from communicating with each other 

directly through the Router.

MBSSID/LAN 

Isolation

Select this to keep the wireless clients in this SSID from communicating with clients in 

other SSIDs or wired LAN devices through the Router.
Select both Client Isolation and MBSSID/LAN Isolation to allow this SSID’s wireless 

clients to only connect to the Internet through the Router.

Channel 

Selection

Set the channel depending on your particular region.
Select a channel or use Auto to have the Router automatically determine a channel to 

use. If you are having problems with wireless interference, changing the channel may 

help. Try to use a channel that is as many channels away from any channels used by 

neighboring APs as possible. The channel number which the Router is currently using 

then displays in the Operating Channel field.

Operating 

Channel

This is the channel currently being used by your AP.

Network 

Authentication

Select WPA2-PSK to add security on this wireless network. The wireless clients which 

want to associate to this network must have the same wireless security settings as the 

Router. When you select to use a type of wireless security, additional options appears in 

this screen. 
If you select OPEN, the Router allows any client to associate with this network without 

any data encryption or authentication.

WPA/WAPI 

Encryption

Select AES to enable Advanced Encryption System (AES) security on your wireless 

network. 

WPA/WAPI 

passphrase

This field displays when you select WPA2-PSK.
Use the automatically generated password or create your own password.

Chapter 5    Wireless 5GHz

44

Use this screen to configure the Router to give exclusive access to specific devices (Allow) or 

exclude specific devices from accessing the Router (Deny).