MitraStar Technology Corporation DSL2401HNAT1CC ユーザーズマニュアル

Chapter 6    LAN

52

Use the Static DHCP screen to change your Router’s static DHCP settings. This table allows you to 

assign IP addresses on the LAN to specific individual computers based on their MAC Addresses. Find 

out the MAC addresses of your network devices if you intend to add them to the Static DHCP 

screen.

Click Network Setting > LAN > Static DHCP.

Figure 32 Network Setting > LAN > Static DHCP 

VendorID Mode

Specify the IPTV’s vendor ID mode type.

VendorID Exclude

Specify if you want to enable vendor ID exclude.

Option240 State

Select Enabled to have the Router assign DHCP option 240 to the LAN set top box.

Option240 Value

Enter the option 240 value.

Lease Time

Specify for how long it takes to assign an IP address to a LAN device before making it 

available for reassignment to other systems.

DNS Server 1/2

Select Obtained From ISP if your ISP dynamically assigns DNS server information 

(and the Router's WAN IP address).
Select User-Defined if you have the IP address of a DNS server. Enter the DNS 

server's IP address in the field to the right. 
Select DNS Proxy to have the DHCP clients use the Router’s own LAN IP address. 

The Router works as a DNS relay. 
Select None to not configure extra DNS servers. 

Table 23   Network Setting > LAN > LAN Setup  (continued)

Table 24   Network Setting > LAN > Static DHCP 

Add new static 

lease

Click this to add a new static DHCP entry. 

Active

This field displays whether the client is connected to the Router.

MAC Address

This field displays the MAC address of the client on the LAN.