MitraStar Technology Corporation DSL2401HNAT1CC ユーザーズマニュアル

Chapter 7    Static Route

61

Table 31   Network Setting > Routing > IPv6 Static Route

Add New Static 

Route 

Click this to configure a new IPv6 static route.

Destination IP 

This is the IP network address of the final destination. 

Prefix length 

This is the bit number of the IPv6 subnet mask.

Gateway

This is the IPv6 address of the gateway.

Device

This specifies the LAN or a WAN PVC.

Modify

Click the Edit icon to go to the screen where you can set up a static route on the Router.
Click the Delete icon to remove a static route from the Router. 

Click Add New Static Route in the IPv6 Static Route screen or click the Edit icon next to a rule. Use 

this screen to configure an IPv6 static route.

Figure 40 Routing > IPv6 Static Route: Add/Edit

Table 32   Routing > IPv6 Static Route: Add/Edit 

Destination IPv6 

Address

Enter the IPv6 network address of the final destination. 

IPv6 Prefix 

Length

Enter the address prefix to specify how many most significant bits compose the 

network address.

Gateway IPv6 

Address

Enter the IPv6 address of the next-hop gateway which helps forward packets to their 

destinations.

PVC IPv6 

Address

Select the interface through which the traffic is routed.