MitraStar Technology Corporation DSL2401HNAT1CC ユーザーズマニュアル

Chapter 9    Network Address Translation (NAT)

78

Click Network Setting > NAT > DMZ to open the DMZ screen. Use this screen to specify the IP 

address of a default server to receive packets from ports not specified in the Port Forwarding 

screen. 

Figure 55 Network Setting > NAT > DMZ 

 

Table 46   Network Setting > NAT > DMZ 

WAN Interface

Select the WAN interface for which to configure a default server.

Default Server 

Address

Enter the IP address of the default server which receives packets from ports that are not 

specified in the Port Forwarding screen. 

Note: If you do not assign a default server, the Router discards all packets received for 

ports not specified in the virtual server configuration.

Click Network Setting > NAT > ALG to open the ALG screen. Use this screen to enable and disable 

the NAT Application Layer Gateway (ALG) in the Router. 

Global End IP

This is the ending global IP address (IGA).

Mapping Set

Select the index number of the address mapping set.

Figure 54 NAT > Address Mapping: Edit (continued)