MitraStar Technology Corporation DSL2401HNAT1CC ユーザーズマニュアル
Chapter 12 Firewall
90
12.2.1 Rules Edit Screen
Use this screen to configure firewall rules. In the Rules screen, select an index number and click a
rule’s Edit icon.
Figure 63 Firewall > Rules: Edit
Table 54 Firewall > Rules: Edit
LABEL
DESCRIPTION
Active
Select this option to enable this firewall rule.
Rule Name
If you want to select an exiting service, choose Select a Service and find the service
to which this rule applies to in the drop-down list box.
If you want to manually configure a service that is not in the list, choose Custom
If you want to manually configure a service that is not in the list, choose Custom
Service. Enter the name of the service and select its protocol in the Protocol field.
If you select ICMP as your protocol, select the ICMP type in the ICMP (Type-code)
field below.
Source IP Address
Enter the source IP address.
Source Subnet Mask
Enter the source subnet mask.
Source Port
Enter a single source port or a port range.
Destination IP
Address
Enter the destination IP address.
Destination Subnet
Mask
Enter the destination subnet mask.