Export Management System Inc EZCODER300 ユーザーズマニュアル
2.
Once the codes have been set, replace the battery cover, and test the system.
Note: In order to avoid duplication of your access code, the following
sequences are not recommended.
• Alternating from “ON” and “OFF” or “OFF” and “ON” position.
• Setting the switch on all “ON” or all “OFF” position.
• It is important for the access code to be set exactly in the same order as
sequences are not recommended.
• Alternating from “ON” and “OFF” or “OFF” and “ON” position.
• Setting the switch on all “ON” or all “OFF” position.
• It is important for the access code to be set exactly in the same order as
the receiver for the transmitter to function properly.
Testing the Transmitter:
1.
Standing approximately 10-30 feet away from the receiver, push the transmitter
button to activate.
2.
Stand in several different areas of usage to locate possible points where
certain structures may interfere with the transmission.
General specification & Feature:
1.
Output Power: -37dBm
2.
Output Frequency: 300MHz
3.
Power Supply: 9Vdc
4.
Operation Indicate LED Lamp
Note:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures;
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures;
-
Reorient or relocate the receiving antenna.