Guangdong Leetac Electronics Technology Co. Ltd. LEETACE5208 ユーザーズマニュアル

External (auxiliary) audio sources such as tablets, smartphones or MP3 players, can 
connect to the CD Stereo System via aux-in.

1. Press POWER button to turn the unit  ON and then press FUNCTION button to 

select “AUX”.

2. Set the volume to the minimum level with the  VOLUME KNOB.
3. Plug in an AUX-IN cable (not included) into the AUX-IN jack on the front of the 

unit.

4. Plug the other end of the cable into the headphone or Line-Out jack of the 

external source.

5. Turn on the external audio device and set it to play. Turn the external audio 

device’s volume up to 2/3. If necessary, adjust the volume on the CD Stereo
System by turning the  VOLUME KNOB.

External devices that have a built-in Bluetooth feature can connect wirelessly to the 
CD Stereo System.

1. Press the FUNCTION button until the LED Display shows  “BLUE”.
2. Set the Bluetooth function of your external device to  ON and begin searching for 

devices.
NOTE:

 The effective distance between your external device and this apparatus 

is 10 meters (33 feet).

3. Once “ITCDS-5000” appears on the paired devices list of your external device, 

select it.

4. A beep will be heard that indicates a connection has been established. 
5.

A few seconds later your Bluetooth connection should be ready to use.

1. Follow the “GETTING CONNECTED” steps above to pair your external device.
2. Turn on the music player program on your external device and set it to play.

Normally, you can control music playback with the  PLAY/PAUSE, PREVIOUS 
BUTTON

 and NEXT BUTTON on the CD Stereo System.

 Some function buttons may not work with all devices.

The Remote Control Unit can operate the unit from a distance. When operating the 
remote control unit, point it towards the front panel of the unit.

“

Even if the remote control unit is operated within the effective range, remote
control operation may be impossible if there are any obstacles between the unit 
and the remote control.