ICable System Co. Ltd. ICS-G101C ユーザーズマニュアル
Page 16
7. Enter your Gateway IP
8. Enter your Subnet Mask
9. Change the DNS Server setting from “Automatic” to “Manual” by clicking the
circle in front of the word “Manual”.
10. Enter your Primary DNS Server IP (This is a mandatory.)
11. Enter your Secondary DNS Server IP (This is an optional field.)
12. After you have entered the above information in the correct fields you must
save your changes by selecting SUBMIT at the bottom of this page.
13. After you receive the “configuration change is successful” message you
must reboot the ICS-G101C. (Refer to section 3.2 Reboot)
4.2 Router Function
This ICS-G101C has built-in router functions and when connected to the PC , will
handle all packets between “WAN-port and PC-port enabling the DHCP server function
and NAT function to support internet functionally .