AMBER Wireless GmbH F162000010 ユーザーズマニュアル

User instructions ERGOremote
4 Start-up

 | 

4.2 Learn channel

4.2 Learn channel

The ERGOremote 's radio code is synchronised with the channel configured

onERGOcom 3 .

▶ Hold down the Channel Selection button on ERGOcom 3 for more than 2 se‐

conds.

Learn Channel Mode appears on the status display.

Note

If the channels do not synchronise within approx. 30 seconds, ERGOcom 3 swit‐

ches back to operational mode.

▶ Hold down the Wake Up/Learn button on the ERGOremote for more than 3 se‐

conds.

The green LED will be lit for 3 seconds to show that synchronisation is complete.

The green LED will flash to indicate that radio communication has not been set up.

16/25