AMBER Wireless GmbH F162000010 ユーザーズマニュアル
User instructions ERGOremote
5 Operation
5 Operation
|
5.1 Controls/displays
Down
In VGA mode, the down button is used to scroll through inactive menus.
In Video mode and OSD (Display Interface) mode, it can be used to navigate bet‐
ween the four images.
5.1.11 Video Input 2 to Display 1
This button is used to switch the incoming image signal at Video Input 2 Directly to
Display 1.
5.1.12 Video Input Camera to Display 1
This button is used to switch the incoming image signal at the Video Input Camera
directly to Display 1.
5.1.13 Video Input 1 to Display 1
This button is used to switch the incoming image signal at Video 1 directly to Display
1.
5.1.14 VGA Input 2 to Display 1
This button is used to switch the associated image contents at VGA Input 2 directly
to Display 1.
5.1.15 VGA Input 1 to Display 1
This button is used to switch the associated image contents at VGA Input 1 directly
to Display 1.
5.1.16 Standby
Select this button to switch ERGOcom 3 and Display 1 over to power saving mode.
This saves power and prolongs the life cycles of the instruments.
5.1.17 Battery warning
Once the ERGOremote has undergone a certain length of operation, it will become
necessary to change its energy source. This is monitored by the instrument.
20/25