Giant Telecom Limited X25Z55 ユーザーズマニュアル
18
‘CALL LOG’ to enter the call log first.
During viewing any type of call log, press [ ] and the
viewed number will be dialed out.
During viewing ‘missed’ or ‘received’ caller ID, press
[INT/OK] to operate it. Three kinds of operations are
provided: ‘Delete’, ‘Save’ and ‘Delete All’.
provided: ‘Delete’, ‘Save’ and ‘Delete All’.
Then, user could browse a sub-menu by pressing
[MENU/ ] or [ /
]
. Press [INT/OK] to execute the
selected operation.
If ‘DELETE’ is selected, after a confirm tone, the next
entry will come out. If no entry is to be deleted, LCD
shows ‘EMPTY’ and then returns to up level menu after
2 seconds.
shows ‘EMPTY’ and then returns to up level menu after
2 seconds.
If ‘SAVE’ is selected, if phone book space is full, a
warning tone will be heard with the below display and
then returns to up level menu after 2 seconds.
then returns to up level menu after 2 seconds.
If phone book space is not full, the selected call log entry
will be saved to phone book.
Before saving to phonebook, user can edit the name and
number.
If the current call log entry matches phone book, it can’t
be saved to phone book with prompt of ‘EXISTED’. If
try to save some call logs without number, it will show
‘INVALID’.
try to save some call logs without number, it will show
‘INVALID’.
If the current call log entry does not match phone book
and it has no name, the name field will be filled with
‘CID NAME’.
‘CID NAME’.
To delete all call logs, user can select ‘DELETE ALL’ in
the call log menu. Further confirmation is necessary
before the operation.
before the operation.
Saving the caller’s number is only possible if a matched
entry is not found in the phone book.
Dial back on call log
Use the [ /
]
or [MENU/ ] button to display the
Caller ID record you want to dial.
During viewing any type of call log, press [0-9] to add
digits before CID number. Press [#] to cancel all additive
digits.
digits.
Press [ ] or [ ] button, the number dials automatically.
7 Technical Specifications
AC/DC Adapter:
Output: 6 V DC, 350mA
AC/DC Adapter
#
: (for
Handset charger)
Output: 6 V DC, 150mA
Rechargeable
Battery: SN-AAA60HJ or equivalent
(Ni-MH, 1.2V, 600mAh)
8 Troubleshooting
Tips
Caller ID Solutions
No Display
Is battery fully charged? Charge the battery for 14 hours
or replace the battery. Make sure the battery is properly
installed and connected.
installed and connected.
If you are using AC (electrical) power, make sure that the
unit is connected to a non-switched electrical outlet.
Disconnect the unit from the plug and plug it in again.
Disconnect the unit from the plug and plug it in again.
Are you subscribed to caller ID service from your local
telephone company?