Shenzhen Lian Yi Da Science Co. Ltd. LYD203CA ユーザーズマニュアル

ページ / 1
Applicant: Shenzhen Lian Yi Da Science Co., Ltd. 
FCC ID: RAWLYD203CA   
             
 MANUAL OF CAMERA 
Features: 
   
  Wireless transmission and reception, Small size, light 
Weight, Low power consumption, High sensitivity, Easy to 
Install & operate, Easy to conceal. 
Operation Instructions: 
1.  Twist the receiver antenna into the receiver 
2.  Connect the receiver to the monitor with AV cable; 
3.  Plug the DC9V 500mA adaptor into the power jack   
of the receiver; 
4.  Insert the DC 8V200mA adaptor into the power jack 
of the camera; 
5.  Adjust the frequency controller on the receiver to the   
required position; 
6.  Adjust the lens of the camera to best position, Mount   
the camera with the screw. 
Function: 
     
Suitable for facilities in the supermarket, shop, department   
Store, clothes shop, workshop, warehouse, school, office and home. 
Important:  
The person who uses this product to peep, shoot and undertake   
Other illegal activities will be punished. 
 
 
 
Image pickup device   
1/3, 1/4 
TV system 
PLA/CCIR NTSC/EIA 
Resolution 380 
TV 
lines 
Scan frequency 
PLA/CCIR: 50Hz NTSC/EIA: 60Hz 
Minimum illumination 
3LUX 
Output power 
50mW, 200mW 
Output frequency 
902MHz~928MHz 
Power supply
DC+6~12V
FCC Information 
This device complies with part 15 of the FCC Rules, Operation is subject to the 
following two conditions: (1)This device may not cause harmful interference, and (2) 
This device must accept any interference received, including interference that may 
cause undesired operation. 
CAUTION: Changes or modifications not expressly approved by summer infant 
may void the user’s authority to operate this equipment.   
NOTE: This equipment has been tested and found to comply with the limits for a 
Class B digital device, pursuant to part15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications, however, 
there is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which 
can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures: 
 
z
  Reorient or relocate the receiving antenna 
z
  Increase the separation between the equipment and the receiver 
z
  Consult the dealer or an experienced radio / TV technician for help.