Shenzhen Lian Yi Da Science Co. Ltd. LYD208CA ユーザーズマニュアル

ページ / 1
Applicant: Shenzhen Lian Yi Da Science Co., Ltd. 
FCC ID: RAWLYD208CA   
             
  MANUAL OF CAMERA 
Features: 
   
  Wireless transmission and reception, Small size , Light 
Weight , Low power consumption, High sensitivity, Easy to 
Install & operate, Easy to conceal. 
Operation Instructions: 
1.  Twist the receiver antenna into the receiver 
2.  Connect the receiver to the monitor with AV cable; 
3.  Plug the DC12V 500mA adaptor into the power jack 
of the receiver; 
4.  Insert the DC 5V 500mA adaptor into the power jack 
of the camera; 
5.  Adjust the frequency controller on the receiver to the   
required position; 
6.  Adjust the lens of the camera to best position, Mount   
the camera with the screw. 
Function: 
     
Suitable for facilities in the supermarket, shop, department 
Store, clothes shop, workshop, warehouse, school, office and   
home. 
Important:   
The person who uses this product to peep, shoot and undertake   
Other illegal activities, will be punished. 
 
 
 
 
Image pickup device   
1/3, 1/4 
TV system 
PLA/CCIR NTSC/EIA 
Resolution 
380 TV lines 
Scan frequency 
PLA/CCIR: 50Hz NTSC/EIA: 60Hz 
Minimum illumination 
3LUX 
Output frequency 
2410MHz~2480MHz 
Power supply 
DC5V 500mA 
 
FCC Information 
This  device  complies  with  part  15  of  the  FCC  Rules,  Operation  is  subject  to  the 
following two conditions: (1)This device may not cause harmful interference, and (2) 
This  device  must  accept  any  interference  received,  including  interference  that  may 
cause undesired operation. 
CAUTION:  Changes  or  modifications  not  expressly  approved  by  Summer  infant 
may void the users authority to operate this equipment.   
NOTE:  This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a 
Class B digital device, pursuant to part15 of the FCC Rules. 
These  limits  are  designed  to  provide  reasonable  protection  against  harmful
interference  in  a  residential  installation.  This  equipment  generates,  uses  and  can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instructions,  may  cause  harmful  interference  to  radio  communications,  However, 
there is no guarantee that interference will not occur in a particular installation. If this 
equipment  does  cause  harmful  interference  to  radio  or  television  reception,  which 
can be determined by turning the equipment off and on, the user is encouraged to try 
to correct the interference by one or more of the following measures: 
 
l  Reorient or relocate the receiving antenna 
l  Increase the separation between the equipment and the receiver 
l  Consult the dealer or an experienced radio / TV technician for help.