Manualsbrain.com
  1. マニュアル
  2. ブランド
  3. Navico Inc.
  4. HS35
  5. ユーザーズマニュアル

Navico Inc. HS35 ユーザーズマニュアル

ダウンロード
ページ / 47
Section 6 - AIS setup menu (AIS SETUP)
Hold down CALL/MENU key for about 1 second to access the following AIS SETUP options.  
The following menu options are explained in this section.
AIS SETUP
AIS FUNC
Section 6-1
AIS DISPLAY
Section 6-2
BAUD RATE
Section 6-3
GPS REDIR
Section 6-4
CPA ALARM
Section 6-5
CPA
Section 6-6
TCPA
Section 6-7
5-9 DSC Test Reply (TEST REPLY)
You can respond to incoming DSC TEST calls with an automatic response or with a manual 
response.
•  MANUAL  manual response is required, press ENT to confirm or press EXIT to cancel.
•  AUTO 
automatically replies after a 10 second delay with an ACK to any incoming 
DSC TEST call. 
DSC SETUP
 LL REPLY  ▲
 AUTO SWITC
►TEST REPLY
 TIMEOUT
TEST REPLY
►AUTO
 MANUAL
5-10 Set the inactivity timer (TIMEOUT)
You can set the inactivity timer with the following options:
•  AUTOMATED you can set the inactivity timer to automatically timeout after a 
period of inactivity for the following two categories: NON-DISTRESS or 
DISTRESS. 
Timeout options are:  
DISTRESS:  NO TIMEOUT; 5 MINS; 10 MINS (default is NO TIMEOUT) 
NON-DISTR: NO TIMEOUT; 10 MINS; 15 MINS (default is 15 MINS)
•  NON AUTO  you can set the inactivity timer to exit any non-automated procedure 
activity. 
Timeout options are: 
NO TIMEOUT; 10 MINS; 15 MINS (default is 10 MINS)
Note: If NO TIMEOUT is selected, then you must press the EXIT key to exit the procedure.
Example: to set a 10 minute TIMEOUT for non-automated functions:
1. 
Select TIMEOUT, then select NON AUTO
2. 
Select desired timeout period: NO TIMEOUT, 10 MINS or 15 MINS
NON AUTO
 NO TIMEOUT
►10 MINS
 15 MINS
TIMEOUT
►AUTOMATED
 NON AUTO
DSC SETUP
 LL REPLY  ▲
 AUTO SWITC
 TEST REPLY
►TIMEOUT
In this example, 10 MINS has been selected, meaning the radio will exit any non-automated 
procedure after a period of 10 minutes of non-activity.
Simrad - RS35 Operation Instructions
Simrad - RS35 Operation Instructions
43
42
See sections 1-3 and 1-4 if you want to know how to move around the menu and enter, save 
and change data. 
6-1 Enable AIS functionality (AIS FUNC)
The AIS function can be turned ON or OFF.  When AIS functionality is selected, the AIS symbol 
 AIS
 is shown on the LCD.
AIS SETUP
►AIS FUNC
 AIS DISPLAY
 BAUD RATE
 GPS REDIR
AIS FUNC
►ON
 OFF
6-2 AIS data display format (AIS DISPLAY)
When viewing the AIS plotter screen, AIS targets can be displayed with the vessels name or 
the vessels MMSI.
AIS SETUP
►AIS DISPLAY
 BAUD RATE
 GPS REDIR
 CPA ALARM
AIS DISPLAY
►SHIP MMSI
 SHIP NAME
6-3 AIS baud rate (BAUD RATE)
AIS data can be output to a compatible chart-plotter / MFD or PC via the NMEA port. The 
NMEA port baud rate can be set to 4800 or 38400. The default setting is 38400. If 4800 is 
selected, a warning that data may be lost is displayed.
AIS SETUP
►BAUD RATE
 GPS REDIR
 CPA ALARM
 CPA
AIS SETUP
 38400
►4800
AIS INFO
MAY BE LOST!
►NO
 YES