Navico Inc. HS35 ユーザーズマニュアル
10-4 AIS Information and display
CAUTION
Not all vessels transmit AIS information and therefore not all vessels will be displayed
or listed in the following AIS screens.
AIS vessel information can be displayed on the radios LCD screen:
1.
1.
Press the AIS/IC button to display the AIS plotter screen
Note: You must have LAT/LON position information for targets to be displayed on the
plotter PPI.
2.
AIS target details will be displayed on the left of the screen. Either the vessels name or
MMSI will be displayed (if the information is available) depending on the setting you
selected in Section "6-2 AIS data display format (AIS DISPLAY)". Also the targets bearing
and distance to you are displayed.
Note: it could take some time before AIS targets are displayed.
3.
A simple plotter PPI on the right hand side of the LCD shows the geographical location
of the AIS targets with respect to your position which is in the center of the plotter PPI.
4.
Press the Zoom In (3CH +/-) or Zoom Out (Scan) keys to change the scale of the plotter.
The scale available is 1nm / 2 nm / 4 nm / 8 nm / 16 nm / 32 nm.
5.
Press the AIS/IC key again to change the display to T/CPA Approach screen.
6.
Rotate the knob to highlight any AIS target shown on the plotter screen. The selected
target will have the target symbol filled in.
NAME:OCEANIC.DISCOVERER
MMSI:503492000 IMO: 9292747
CALL SIGN:VMQ8808
DIST: 1.62nM BEAR: 285
°
TCPA: -----
HEADING: 195.0
°
CPA: 1.62nM
ROT: 0.0 /min
WIDTH: 0.0m
SOG: 9.9KTS
LENGTH: 60.0m
COG: 219.0
°
RECEIVED: 1M19S LAT: 36
°45.785’S
DRAUGHT:----- LON:174
°49.157’E
TYPE: PASSENGER SHIP - ALL SHIPS
OF THIS TYPE
STATUS:UNDERWAY USING ENGINE
7.
Press ENT to view full details of the highlighted target such as MMSI, Vessel name,
distance, bearing, heading, ROT, COG, SOG, status and other vessel information.
10-4-1 T/CPA approach screen
1.
When in AIS mode, press the AIS/IC key again to toggle between the standard AIS
screen and the T/CPA Approach screen.
2.
In TCPA Approach mode, the approaching AIS target's details are listed on the left side
along with it's geographical position on the plotter PPI.
3.
The zoom range is automatically selected to the best range according to the selected
target on the left. You can’t change the zoom range in this mode.
4.
Press +/- button or rotate the CH knob to select the target, press ENT key to display
target information, or press EXIT key to return to the previous display.
Note: If the radio detects a TCPA or CPA breach, the T/CPA Approach screen will
automatically popup with an alert tone. Press EXIT to stop the alert. The alert will sound again
after 1 minute if the AIS alarm has not been released.
automatically popup with an alert tone. Press EXIT to stop the alert. The alert will sound again
after 1 minute if the AIS alarm has not been released.
T/CPA APPROACH
228278700
0.59Min 1.0nM
10-4-2 Plotter symbols and meanings
Your vessel is always in the center of the plotter screen. You are represented by a
solid circle, along with a small line that indicates your bearing with respect to North.
solid circle, along with a small line that indicates your bearing with respect to North.
All other vessels or targets displayed on the plotter screen are represented by a
diamond shape. These are targets around your vessel that are within the current
zoom distance setting. The small line indicates the targets bearing.
diamond shape. These are targets around your vessel that are within the current
zoom distance setting. The small line indicates the targets bearing.
When a target is selected, it is represented by a solid diamond.
Examples:
You and the target vessel are heading away from each other.
You and the target vessel are heading towards each other.
Note: Nautical Miles is the only unit used in AIS mode.
Simrad - RS35 Operation Instructions
Simrad - RS35 Operation Instructions
65
64