SEECODE Co. Ltd. SFK509 ユーザーズマニュアル
1. How to Use
a. Charging
-
Open the Power Connector Outlet cover.
-
Connect the supplied charger to the Power Connector Outlet.
Î When the Charger is plugged in, the LED light of the SFK509 will be
Red.
When fully charged, which may take up to 3 hours, the Red LED light
will be turned off.
Tip)
-
Low battery status will be indicated with a beep every 10 seconds.
It is recommended that the device should be charged immediately.
b. Power
On
-
Press and hold the Call/Power Button for 2 ~ 3 seconds.
Î An ascending tone indicates the device is switched on.
c. Power
Off
-
Press and hold the Call/Power button for 3 ~ 4 seconds.
Î A descending tone indicates the device is switched off.
d. Bluetooth
Pairing
-
After turning the SFK509 on, press and hold the Volume Up & Down
button for more than 3 seconds.
Î You will hear a melody
and the blue LED light will blink every
second.
-
To search and register the SFK509 to your Bluetooth enabled handset.
Î Please refer to the user manual of the handset.
Î When asked for the Pass/PIN code during the pairing
Î When asked for the Pass/PIN code during the pairing
procedure, please enter “0000” (4 Zeros).
Î Once pairing has completed successfully, you will hear a beep
and the blue LED light will blink
every 4 ~ 5 seconds.
If the LED light still blinks every second, please repeat the pairing
procedure from the beginning.