Bosch Termotecnologia S.A. 8708300283 ユーザーズマニュアル
18
Troubleshooting
6 720 680 209
• If an error code is generated immedi-
ately after the installation of the
remote control transceiver PCB,
ensure that the two large electrical
connectors (Fig. ) on the main PCB
are properly seated.
remote control transceiver PCB,
ensure that the two large electrical
connectors (Fig. ) on the main PCB
are properly seated.
• Error code may not be resettable.
Consult water heater's installation
manual or www.boschpro.com for
further troubleshooting on error
codes.
manual or www.boschpro.com for
further troubleshooting on error
codes.
5. Remote will not memorize
desired temperature setting
desired temperature setting
B
Verify that the remote control
"program" button is depressed until
the remote display reads "Pr".
"program" button is depressed until
the remote display reads "Pr".
6. Priority "
" symbol will not
clear
B
Verify no hot water is being used
when trying to clear "priority"
function.
when trying to clear "priority"
function.
B
With no hot water running, press
and hold the “
and hold the “
” or “
”
buttons for 5 seconds on the locked
out device (remote or water heater)
until the "
out device (remote or water heater)
until the "
" symbol (Fig. 10,
Pos. 6) disappears.
B
Do not use any hot water for at least
5 minutes. The priority function
should automatically clear after this
time period.
5 minutes. The priority function
should automatically clear after this
time period.
i
Memorization of a
selected temperature
only saves to the device
on which it was originally
programmed. To
retrieve a memorized
temperature setting, you
must use the device with
which it was
programmed.
selected temperature
only saves to the device
on which it was originally
programmed. To
retrieve a memorized
temperature setting, you
must use the device with
which it was
programmed.
6720680209-0902_(New Remote control).fm Page 18 Monday, January 19, 2009 8:58 AM