WABCO GmbH OPTITIRE ユーザーズマニュアル
5
Operation
OPTITIRE
33
5.7
Operation via SmartBoard
OPTITIRE can be controlled via the WABCO SmartBoard. The SmartBoard can be
used to operate OPTITIRE as a stand-alone variant for trailers.
used to operate OPTITIRE as a stand-alone variant for trailers.
– On the SmartBoard select the functional group "Tire pressure monitoring".
The pressures for the individual tires, the nominal tire pressure value and the con-
figuration are displayed in this functional group.
figuration are displayed in this functional group.
The link ed image cannot be display ed. The file may hav e been mov ed, renamed, or deleted. Verify that the link points to the correct file and location.
The key <Arrow right> is used to switch between the different tires.
The tire symbol flashes if the tire pressure is too low.
If the tire has a fault, the warning LED and the menu item for this functional group
flashes in the main menu.
If the tire has a fault, the warning LED and the menu item for this functional group
flashes in the main menu.
Notation
Description
Note
Nominal pressure value
The nominal pressure value
is set in the parameters of
the OPTITIRE electronic
control unit.
is set in the parameters of
the OPTITIRE electronic
control unit.
The value applies to a cold
tire.
tire.
The link ed image cannot be display ed. The file may hav e been mov ed, renamed, or deleted. Verify that the link points to the correct
file and location.
file and location.
Currently saved pressure for
the selected tire.
the selected tire.