ATI Electronics Co. Ltd ATIH900 ユーザーズマニュアル
Charge the battery
1. Connect the charger to the correct outlet.
2. While the charger is connected, the red indicator
light displaying during charging. If charging does
not start, disconnect the charger, plug it in again,
and retry. Charging the battery fully may take up
to 2 hours.
3. When the battery is fully charged, the red indicator light turn blue.
Disconnect the charger from the headset and the wall outlet.
2. While the charger is connected, the red indicator
light displaying during charging. If charging does
not start, disconnect the charger, plug it in again,
and retry. Charging the battery fully may take up
to 2 hours.
3. When the battery is fully charged, the red indicator light turn blue.
Disconnect the charger from the headset and the wall outlet.
The fully charged battery has power for up to 3 hours of talk-time or up to 80 hours
of standby time. However, the talk and standby times may vary when used with
different mobile phones or other compatible Bluetooth devices, usage settings,
usage styles, and environments.
When battery power is low, the headset will remind you by beeps every 20 seconds,
and the red indicator light starts to flash.
of standby time. However, the talk and standby times may vary when used with
different mobile phones or other compatible Bluetooth devices, usage settings,
usage styles, and environments.
When battery power is low, the headset will remind you by beeps every 20 seconds,
and the red indicator light starts to flash.
2
2
1. For first time use, please charge the headset fully. If you cannot see the indicator
light when charging, please leave the headset on the charging for a while
(Approx 15-35 Minutes), then the indicator light will be on.
2. If after a full charge, you cannot turn the headset on, please re-plug the headset
to the charger for a few second to activate it.
light when charging, please leave the headset on the charging for a while
(Approx 15-35 Minutes), then the indicator light will be on.
2. If after a full charge, you cannot turn the headset on, please re-plug the headset
to the charger for a few second to activate it.
IMPORTANT NOTICE!
Battery information
3
3
This device has a built-in rechargeable battery. Do not attempt to remove the battery
from the device as you may damage the device.
from the device as you may damage the device.
l
Your device is powered by a built-in chargeable battery. The full performance of a
new battery is achieved only after two or three complete charge and discharge
cycles. The battery can be charged and discharged hundreds of times.
l
cycles. The battery can be charged and discharged hundreds of times.
l
Unplug the charger from the vehicle and the device when not in use.
Do not leave a fully charged battery connected to a charger, since overcharging
may shorten its lifetime. If left unused, a fully charged battery will lose its charge
over time. If the headset will go unused for a long time, please charge fully and
turn off the headset.
l
may shorten its lifetime. If left unused, a fully charged battery will lose its charge
over time. If the headset will go unused for a long time, please charge fully and
turn off the headset.
l
To prevent over discharge endangering the battery, you are recommended to
charge the headset fully each month.