Behringer ULM2000 ユーザーズマニュアル
4
ULTRALINK ULM2000
Determining which microphone is assigned to which receiver is done either by observing the transmission
channel in the display or by comparing the transmission frequency. In addition, the ULTRALINK equipment
from BEHRINGER leaves you the option to color-code your gear for easy identification.
channel in the display or by comparing the transmission frequency. In addition, the ULTRALINK equipment
from BEHRINGER leaves you the option to color-code your gear for easy identification.
Beyond that, both units feature other useful functions, such as Scan and Auto Mute. This way, no
wishes are left open during practice or in live situations.
wishes are left open during practice or in live situations.
The following instructions are intended to familiarize you with the unit’s controls, so that
you can learn all of its functions. After having thoroughly read these instructions, store them
in a safe place for future reference.
you can learn all of its functions. After having thoroughly read these instructions, store them
in a safe place for future reference.
1.1 Before you get started
1.1.1 Shipment
The ULM2000 was carefully packed at the factory to assure secure transportation. Should the condition of
the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look
for physical indications of damage.
the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look
for physical indications of damage.
Damaged units should NEVER be sent directly to us. Please inform the dealer from whom
you acquired the unit immediately as well as the transportation company from which you
took delivery of the unit. Otherwise, all claims for replacement/repair may be rendered invalid.
you acquired the unit immediately as well as the transportation company from which you
took delivery of the unit. Otherwise, all claims for replacement/repair may be rendered invalid.
Always use the original packaging to avoid damage due to storage or shipment.
Never leave children unsupervised with the unit or its packaging.
Please dispose of all packaging materials in an environmentally friendly manner.
1.1.2 Registration
Before powering up the unit for the first time, you have to register it with your local postal/telecommunication
authority! Additional information is available there.
authority! Additional information is available there.
1.1.3 Initial operation of the microphone
The ULM2000 microphone requires one or two 9V batteries. Of course, using only one 9V battery decreases
the effective uptime. When using only one battery, it does not matter which of the two battery compartments
you use. Either one will work.
the effective uptime. When using only one battery, it does not matter which of the two battery compartments
you use. Either one will work.
When running the unit on two batteries, please make sure that both batteries are equally
fresh. Therefore, whenever changing batteries, always use two brand-new batteries.
fresh. Therefore, whenever changing batteries, always use two brand-new batteries.
When the battery is nearly depleted, the LED located on the bottom of the microphone will start to blink
rapidly. Simultaneously, a special inaudible signal is sent to the ULR2000 receiver, and “LowBat” is shown in
its display. To assure dependable operation of the transmitter-receiver system, change the transmitter batteries
as soon as possible after seeing the
rapidly. Simultaneously, a special inaudible signal is sent to the ULR2000 receiver, and “LowBat” is shown in
its display. To assure dependable operation of the transmitter-receiver system, change the transmitter batteries
as soon as possible after seeing the
“
LowBat
”
message.
To change the transmitter (mic) batteries:
1.
Twist the upper part of the microphone grip while firmly holding its lower portion.
2.
Pull the battery compartment out of the microphone until you reach its stop position.
3.
Remove the old batteries. Insert one or two fresh 9V batteries.
4.
Slide the upper part of the microphone over its lower portion and firmly screw it on.
1.1.4 Online registration
Please do remember to register your new BEHRINGER equipment right after your purchase by visiting
www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions of our
warranty carefully.
www.behringer.com (alternatively www.behringer.de) and kindly read the terms and conditions of our
warranty carefully.
Should your BEHRINGER product malfunction, our goal is to have it repaired as quickly as possible.
To arrange for warranty service, please contact the retailer from whom the equipment was purchased.
Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our
subsidiaries. Corresponding contact information is included in the original equipment packaging
(Global Contact Information/European Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be found in the support area of our website
(www.behringer.com).
To arrange for warranty service, please contact the retailer from whom the equipment was purchased.
Should your BEHRINGER dealer not be located in your vicinity, you may directly contact one of our
subsidiaries. Corresponding contact information is included in the original equipment packaging
(Global Contact Information/European Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be found in the support area of our website
(www.behringer.com).
1. INTRODUCTION