Shenzhen Baojia Battery Technology Co. Ltd. LUZ100 ユーザーズマニュアル

Press the Crystal (TALK button) on your LUZ to start all functions.

Thank you for purchasing MiPow LUZ 100, you will enjoy its unique
design with crystal, tubular shape body and features.

Thank you

About MiPow LUZ

NOTE

MiPow LUZ come with multiple earbud options
and choose the one you feel most comfortable.

CHARGING PINS

DC SOCKET

POWER LIGHT
INDICATOR

Fit for You !

We have given you 3 earbuds. Try all the options. Pick the one that is most
comfortable and fit for you.

Earbuds

3 different size

Talk
button

TALK BUTTON

CHARING CONTACTS

LIGHT

MICROPHONE

EARBUD

About LUZ Charging Dock

The Talk Button is the “SWARVOSKI” crystal.

Choose your Fit

Bluetooth

headset

battery

shown

Talking

•

Press TALK Button for 2 seconds or more.

POWER ON

•

Press & Hold TALK Button for 6 seconds.

POWER OFF

•

Press TALK Button

ANSWER A CALL

•

Press TALK Button for 2 seconds while

phone is ringing.

REJECT A CALL

•

Select or dial the number from your phone or

phonebook.

MAKE A CALL

•

When you talk on the LUZ, press 2 seconds

to transfer the call to the phone, press 2 seconds again to transfer
the call back to LUZ.

TRANSFER A CALL

•

Double Click TALK Button

when you hear music or in standby mode

REDIAL LAST NUMBER CALLED

•

While in standby mode, press

TALK Button for 2 seconds, and then speak a command.

INITIATE VOICE DIALING

Troubleshooting & FAQ

I hear crackling noises

For the best audio quality, always wear your headset on the same side if
your body as your mobile phone.

I cannot hear anything in my headset

• Ensure that the headset is paired with the phone.
• Make sure that the phone is connected to the headset-if it does not connect
either from the phone’s bluetooth menu or by pressing the TALK button,

following the pairing instructions in Section

3 or 4

I have pairing problems

Will the LUZ 100 work with other Bluetooth devices ?

I cannot use reject call, redial or voice dialing,
battery App meter

Taking care of your LUZ

you may deleted your headset pairing connection in your mobile phone.
Follow the pairing instructions in section

3 or 4.

The LUZ is designed to work with Bluetooth mobile phones. It can also work
with other devices that are compliant with Bluetooth version 3.0 and support
a headset, hands-free profile, A2DP music play.

These functions are dependent on your phone supporting them. Please
check your mobile phone’s manual for further details.

• Always store the LUZ with the power off and safely protected.
• Avoid storage at extreme temperatures (above 45°C or below -10°C).
This can shorten battery life and may affect operation.
• Do not expose the LUZ to rain or other liquids.

Notes on Environmental Protection

After the implementation of the European Directive 2002/96/EU

in the national legal system, the following applies: Electrical and

electronic devices must not be disposed of with domestic waste.

Consumers are obliged by law to return electrical and electronic

devices at the end of their service lives to the public collection

points that are set up for this purpose or designated points of

sale.

However, such details are defined by the national law of

the respective country. This symbol on the product, the instruction

manual or the packaging indicates that the product is subject to

these regulations.

By recycling, reusing the materials, or other forms of utilizing old

devices, you are making an important contribution in protecting

our environment.

Put on your Earbud

Battery meter on iPhone shows up automatically when connected.

•

When LUZ is put into the charging dock, LUZ is in

sleep mode and the pairing is disconnected. You can take
the call from mobile phone.

SLEEP

•

When LUZ is taken out of the charging dock, LUZ is

in wake mode and the pairing is auto-connected. You can
take the call from LUZ.

WAKE

NOTE

This will also answer an incoming call while on a call, When

you LUZ is connected to TWO phones, this will answer the phone
on the call form either phone.

NOTE

When connected to multiple phones, Redial and

Voice Dial will work on the phone with last active call.

TALK
Button

Light

sleep

wake

Pair LUZ with your FIRST phone

When pairing, the blue indicator light flashes quickly.

Talk
button

Pair LUZ with your SECOND Phones

Power off your LUZ by Press & Hold TALK button for 6 seconds.
Press & Hold the TALK Button for 7 Seconds to activate pairing mode
on your LUZ.

Go to your phone’s Bluetooth settings, ADD or SEARCH FOR DEVICES

when “MiPow-LUZ” appears, select it or enter passcode “0000" if asked.
• Announce “Phone TWO Connected” when paired.

Then Press the TALK button for 2 seconds to pair the FIRST phone again,

announce “ Phone ONE Connected” when paired. Now LUZ is connected
to 2 Phones. It can answer calls from both phones

•

NOTE If your LUZ is connected before, then you just need to press the

TALK button for 2 seconds to reconnect.

To fit a new earbud, position the earbud over the
speaker housing and gently press down on
the earbud.

TALK
Button

• LUZ’s Indicator light flashes BLUE when battery is low.
• To charge, place the LUZ headset into the charging dock with the
CRYSTAL facing you.
• Charge time is 120 minutes(for full).
• Indicator light will be

while the LUZ is charging.

• Indicator light will turn OFF when the LUZ is fully charged.

solid BLUE

Charging your LUZ

Power up !

To power up your LUZ, just put it into the included charging dock. Plug
DC jack to the dock and then plug the USB cable to your computer or
wall charger (not included).

Charging

Power up your Charging Dock

Blue light power indicator will be seen on the bottom of the charging dock
when you plug the USB cable to your computer USB or wall charger USB

Pairing

1.
2.

Activate pairing mode on your LUZ.
Turn on Bluetooth

On an iPhone

Go to SETTINGS > GENERAL > and enable Bluetooth.

On an Blackberry

Go to SETTINGS/OPTIONS > BLUETOOTH and enable Bluetooth.

On an Android Phone

Go to SETTINGS > WIRELESS & NETWORK > Bluetooth

Settings and enable Bluetooth.

Other Cell Phones

Review the instruction manual that come with your phone

This is a one-time event per phone. To pair your LUZ to anther phone, repeat
these steps. Pair MiPow LUZ with your second phone.

LUZ Voice Guidance

The Luz is loaded with voice announcements that talks you
through setup and daily operation, In the table below you can
see the most common announcements.

Press & Hold the TALK Button for 7 Seconds to activate
pairing mode on your LUZ.
• Go to your phone’s Bluetooth settings, ADD or SEARCH
FOR DEVICES when “MiPow-LUZ” appears, select it or
enter passcode “0000" if asked.
• Announced “Phone ONE Connected” when paired.

Pair LUZ by Voice Guide

Wear your LUZ and press the TALK button as
the picture shown on the left. Press & Hold the
TALK button for 7 seconds - about 2 seconds
interval, it will announce “Power On” and carry
on another 4 seconds interval, it will announce
“Pairing” and then release TALK button and

to your phone’s Bluetooth settings.

Thank you for your purchase of MIPOW's product. MIPOW warrants that the
product is at the time of its original purchase free of defects in workmanship
and material. This Limited Warranty for the product shall last for twelve(12)
months from the date of original purchase.

This original warranty card and original invoice must be presented at the time
you require warranty service or such warranty will be voided.

This limited warranty is valid only if the product is used for the purpose for
which it was designed. it does not apply to damage or loss caused by
negligence; physical abuse; misuse; accident; exposure to moisture; dampness
or extreme thermal; unauthorized modifications; unauthorized opending or
repair; forces of nature; or other actions beyond the reasonable controt
of MIPOW.

In case of when the warranty does not apply, a repair or replacement charge
will be incurred. the customer shall be responsible for sending the defective
product to and collecting the repaired or replaced product from the service
centre.

NB: MIPOW reserves the right to interpret the terms and conditions
contained herein; and the right for any changes without prior notice.

Limited Warranty

Supports up to 8 paired devices and 2 active HP

and A2DP connections with Multipoint

Wideband-capable

HD Audio (16KHz)

7 grams

48(L) x 24(W) x 8.8(Φ) mm

LUZ Specifications

TALKTIME

STANDBY TIME
CHARGING
WIRELESS RANGE
BLUETOOTH
CONNECTIONS

SPEAKER

AUDIO QUALITY

WEIGHT
DIMENSIONS

Up to 7 hours

2 hours (full)

33ft (10m)

Bluetooth 3.0, 2.1+EDR

Up to 5 days

Listening to Music using LUZ

LUZ is capable of streaming over Bluetooth - either from a
mobile phone or any other Bluetooth device supporting A2DP.
Once you have paired your LUZ with your mobile phone or
with a Bluetooth music player, use your phone or music player
to play and pause. When you receive call, the music will
automatically be suspended and you will be able to answer or
reject a call through the LUZ. Once you end a call, the music
should recommence.

www.mipow.com

English Contents

Thank you 2

About LUZ Charging Dock 2

Choose your Fit 3

Charging 4

Pairing 5

Pair LUZ with your SECOND Phones 6

LUZ Voice Guidance 7

Listening to Music using LUZ 10

LUZ Specifications 1

Troubleshooting & FAQ 1 1

Taking care of your LUZ 1 2

• ADD or SEARCH FOR DEVICES when

appears,

select it or

if asked.

• Announced “Phone ONE Connected” when paired.

“MiPow-LUZ”

enter passcode “0000"

Bluetooth

headset

battery

shown

Battery meter on iPhone shows up automatically connected.

“Power On” Announced when Luz is turned on.

“Power Off” Announced when Luz is shut down.

“Redial” You do last number redial.

“Phone One Connected” Announced when Luz is connected to
your FIRST phone.

“Phone Two Connected” Announced when Luz is connected to
your SECOND phone.

“Disconnected” Announced if a connected phone or
device is turned off, goes out of range
or has bluetooth disabled.

“Battery low” “Battery level is low” is announced when battery
has remained below one-third of the battery
power.

“Battery medium” “Battery level is medium” is announced when

battery has remained below two-third of the
battery power.

“Battery high” “Battery level is high” is announced when
battery has remained above two-third of the
battery power.

Mobile phone’s Bluetooth settings:

Pair LUZ by Voice Guide 8

Talking 9

Adjust the LUZ Speaker Volume

Press to increase the LUZ speaker loudness
Press to decrease the LUZ speaker loudness

•

When LUZ is put into the charging dock with no

charging power connected, the charging dock is worked
as a stand, and LUZ is still in Standby mode that you can
take call from LUZ.

Stand

Stand

Bluetooth settings

Bluetooth

MiPow- LUZ

Pair with this device

MiPow- LUZ

Paired

Bluetooth settings

Device name
***********
Visible

Make Device Visible

Visible time-out

set how long device will be visible for

Search for devices

Bluetooth devices

Bluetooth

Device name
***********
Visible

Make Device Visible

Visible time-out

set how long device will be visible for

Search for devices

Bluetooth devices

Device name
***********
Visible

Make Device Visible

Visible time-out

set how long device will be visible for

Search for devices

Bluetooth devices

Device name
***********
Visible

Make Device Visible

Visible time-out

set how long device will be visible for

Search for devices

Bluetooth devices

Bluetooth settings

Bluetooth

MiPow- LUZ

Pair with this device

MiPow- LUZ

Paired

Bluetooth settings

Device name
***********
Visible

Make Device Visible

Visible time-out

set how long device will be visible for

Search for devices

Bluetooth devices

Bluetooth

Device name
***********
Visible

Make Device Visible

Visible time-out

set how long device will be visible for

Search for devices

Bluetooth devices

Device name
***********
Visible

Make Device Visible

Visible time-out

set how long device will be visible for

Search for devices

Bluetooth devices

Device name
***********
Visible

Make Device Visible

Visible time-out

set how long device will be visible for

Search for devices

Bluetooth devices

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician
for help.

Thank you for purchasing MiPow LUZ 100,
we hope you have a pleasant experience with
our product

Please view this user manual carefully before use.

LUZ 100

LUZ100

Revolutionary
Bluetooth Mono Headset

FCC Statement

This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired
operation.

changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.