Wanlida Group Co. Ltd. CF-8003 ユーザーズマニュアル
4
Fully tighten the license plate bolts.
Route all wires behind interior panels or under carpeting so they are hidden.
Use cable ties to neatly gather all excess wire.
Note: Keep camera lens and the GPS unit screen clean to ensure optimum picture
quality.
quality.
Camera Operation
Once fully fitted into the vehicle the operation of the reversing camera is simple.
Whenever you put the vehicle into reverse, the camera picture will automatically appear
on the GPS unit display.
Whenever you put the vehicle into reverse, the camera picture will automatically appear
on the GPS unit display.
The optimal viewing angle of this camera is 120 degree horizontally and 140 degree
diagonally. The optimal viewing distance is about 2M.
diagonally. The optimal viewing distance is about 2M.
NOTE: the Camera receiver needs to be fitted to the GPS unit for the camera to work.
(See GPS instruction manual)
(See GPS instruction manual)
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. This device complies
with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
FCC Radiation Exposure Statement The antennas used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons and must not
be collocated or operating in conjunction with any other antenna or transmitter.