GRAUPNER CO. LTD. 16007500 ユーザーズマニュアル

P4
Normal Mode
(1) Basic Operation
- When Power on, the last used memory will be bound
Receiver.
-  In  case  of  No  Receiver  connection,  if  you  press  the
button of left stick for 1sec, it will search Receiver.
- if Receiver is not searched, it will be repeated until
Receiver,  and  you  can  bind  with  new  Receiver  by
pressing BIND/LED Switch.

(2) BIND mode
In case of no having receiver, which is already saved in

memory, then you can bind with new receiver by
pressing BIND Switch.

If Receive Signal is normal, RED LED wi
In  case  of  Waiting  Receiver  or  Range  warning,  RED
LED will be slow blinked.

(3) Range Test mode
Functional  switch:    Press  shortly  button  of
SNAP once.
After  Binding  with  Receiver,  if  you  shortly  press  this
functional  Switch,  Range  Test  mode  will  operate  for
90sec.
While  operating  Range  mode,  if  you  shortly  press  this
switch, Range test mode will be ended.
At  Range  mode  operation,  RED  LED  will  blink  quickly
and make buzzer sound.
After 90sec, Beep sound will be occurred
enter to Main Mode.

(4) Low Battery Voltage warning
RED LED will do fast blinking. ( RED LED indicate State)
At  under  3200V,  Warning  will  be  announced  and  at
3300V, warning will be removed.
3Cell Alkaline Battery will be used.

Important Point :
While Binding, Transmitter should always have distance
from the Receiver. At least 1m should have.
Otherwise, it might be connected to Return channel, and

do malfunction.

he last used memory will be bound to

In case of No Receiver connection, if you press the

it will search Receiver.

is not searched, it will be repeated until find

Receiver, and you can bind with new Receiver by

In case of no having receiver, which is already saved in

memory, then you can bind with new receiver by

If Receive Signal is normal, RED LED will be turned On.
In case of Waiting Receiver or Range warning, RED

Press shortly button of SPEED +

fter Binding with Receiver, if you shortly press this

functional Switch, Range Test mode will operate for

While operating Range mode, if you shortly press this

t Range mode operation, RED LED will blink quickly

occurred one time, and

RED LED indicate State)

At under 3200V, Warning will be announced and at

While Binding, Transmitter should always have distance

ave.

Otherwise, it might be connected to Return channel, and

Program Mode (workable only at Binding condition
(1) Condition of Basic Operation
Enter  to  Program  mode
simultaneously for 2sec.

Release  Program  mode
simultaneously for a second.

Indication  of  Program  mode  :    Red  Led
once per a second interval
.

Program mode : Blink once per a second interval

(2) Saving Data
50pcs of last used Data could be saved.

  (3) Adjustment of Servo End
In case of Stick Calibration, Default will
value, Customer can adjust trim as below
- 100% --> 1100us ~ 1900us
At Max. or Min. Position of Stick,
Range of Trim is available 0% ~ 100%
If  move  to  100%  position,  High  Beep  sound  will  be
occurred once.

  - Red Led will be blinked once per a second interval

  Program mode : Blink once per a second interval

(4) Servo Reverse Set
This is used when change Servo direction.
All  sticks  are  on  neutral  pos
switch to Max. or Min. Position.
If press Power switch with pressed trim switch to Max. or
Min.  position,  Normal  mode  and  Reverse  mode  will  be
changed.
-  Indication  of  Servo  Recei
blinked once per a second interval
- Normal mode : Green LED will be blinked once per a
second interval.

workable only at Binding condition)

Condition of Basic Operation

: Press two Stick Switch

simultaneously for a second.

Program mode : Red Led will be blinked

once per a second interval

Data could be saved.

Servo End Position

case of Stick Calibration, Default will be 100%. At this

value, Customer can adjust trim as below way.

> 1100us ~ 1900us

on of Stick, adjust Trim Switch

0% ~ 100% ~ 150%.

f move to 100% position, High Beep sound will be

Red Led will be blinked once per a second interval

once per a second interval

when change Servo direction.

are on neutral position, and move the trim

tion.

f press Power switch with pressed trim switch to Max. or

Min. position, Normal mode and Reverse mode will be

iver mode : Red Led will be

once per a second interval

Normal mode : Green LED will be blinked once per a