GRAUPNER CO. LTD. 16007812 ユーザーズマニュアル
8 / 28
S1002.PRO_jh_V1
Before you start using the remote control model, you have to
check the further relevant laws and regulations. These laws you
must obey in every case. Pay attention to the possibly different
laws of the countries.
check the further relevant laws and regulations. These laws you
must obey in every case. Pay attention to the possibly different
laws of the countries.
The insurance is mandatory for all kinds of model operation. If
you already have one, so please inform yourself if the operation
of the respective model is covered by your insurance. If this is not
the case, conclude a special liability insurance policy for models.
you already have one, so please inform yourself if the operation
of the respective model is covered by your insurance. If this is not
the case, conclude a special liability insurance policy for models.
Protect all equipment from dust, dirt, moisture. All equipment
must be protected from vibration as well as excessive heat or
cold. The models may only be operated remotely in normal out-
side temperatures such as from -10°C to +55°C.
must be protected from vibration as well as excessive heat or
cold. The models may only be operated remotely in normal out-
side temperatures such as from -10°C to +55°C.
First, always perform a range and function test on the ground
before you start using your model. Only so you can grant a safe
use! How to perform a range test is explained in the Part 2 of the
manual.
before you start using your model. Only so you can grant a safe
use! How to perform a range test is explained in the Part 2 of the
manual.
Only operate ALL your HoTT components using the current soft-
ware version.
ware version.
Start a data log every time you use your model. With a log-data
an occurred technical defect can be recognized and verified.
Only so it is possible to considerate an eventual compliant.
an occurred technical defect can be recognized and verified.
Only so it is possible to considerate an eventual compliant.
For your safety by handling the transmitter
WARNING
Also while programming the transmitter, make sure that a con-
nected motor cannot accidentally start. Disconnect the fuel sup-
ply or drive battery beforehand.
CAUTION
Risk of fire! Avoid every kind of short-circuit in all sockets of the
transmitter! Use only the suitable connectors. In no case the elec-
tronic component of the transmitter may be changed or modified.
Due to licensing reasons, any reconstruction and/or modification
of the product is prohibited.
Inform yourself before flying your
model on which maximum altitude
you can fly in the uncontrolled
airspace over the starting position
and do not exceed it.
!
!