SMA Solar Technology AG SUNNYVIEW ユーザーズマニュアル
SMA America, LLC
8 "Settings" Menu Item
User Manual
SunnyView-BA-eng-BUS121811
29
8.8 Country Settings
1. Select
> Settings > General > International > Country.
2. Select a country.
3. Check the country settings. Change the country settings if necessary.
3. Check the country settings. Change the country settings if necessary.
Tip: Press the [Reset] button to restore the default country settings.
4. Select [Next].
5. If you do not wish to configure any other settings, select .
5. If you do not wish to configure any other settings, select .
8.9 Setting the Date and Time
The Sunny View can be set for automatic time synchronization if a WLAN connection is available
(see Section 8.18 "Setting up a WLAN Connection", page 35) and the "Automatic" checkbox is
activated.
You can choose between a 12-hour or 24-hour time format by selecting the "24-hour format"
checkbox accordingly.
(see Section 8.18 "Setting up a WLAN Connection", page 35) and the "Automatic" checkbox is
activated.
You can choose between a 12-hour or 24-hour time format by selecting the "24-hour format"
checkbox accordingly.
1. Select
> Settings > General > Date & time.
2. In the "Time zone" field select the desired time zone.
3. In the "Date" field, select the date.
4. Set the date using [+] and [‒].
5. Select [Accept].
6. In the "Time" field, select the time.
7. Set the time using [+] and [‒].
8. Select [Set].
9. If you do not wish to configure any other settings, select .
3. In the "Date" field, select the date.
4. Set the date using [+] and [‒].
5. Select [Accept].
6. In the "Time" field, select the time.
7. Set the time using [+] and [‒].
8. Select [Set].
9. If you do not wish to configure any other settings, select .
Diagrams may be incorrectly displayed
Changing the set time while the inverter is feeding in can cause diagrams to be displayed with
permanent errors.
permanent errors.
• Only change the set time when the inverters are not feeding in (e.g., when it is dark).