Precor PRCR0111 ユーザーズマニュアル
32
Assembling the Atlas Treadmill
Threading the Cable Assembly (AT-75)
Earlier in the installation, you threaded the necessary
cables through the frame of the base unit and out the
passthrough opening in the display mount. As you line up
the back plate on the display with the display mount, you
must make sure that the cable assembly passes correctly
through the openings in both components.
cables through the frame of the base unit and out the
passthrough opening in the display mount. As you line up
the back plate on the display with the display mount, you
must make sure that the cable assembly passes correctly
through the openings in both components.
Important: Before you begin the following procedure, make
sure that the rear cover is removed from the display. Set the
cover aside, along with any mounting screws used to secure
it in place on the display, for use later in the installation.
sure that the rear cover is removed from the display. Set the
cover aside, along with any mounting screws used to secure
it in place on the display, for use later in the installation.
To thread the cable assembly:
1. Make sure that as much of the each cable as possible
passes through the opening in the middle of the
display mount on the base unit.
display mount on the base unit.
2. Position the display over the display mount.