TP-Link Technologies Co. Ltd. C20I ユーザーズマニュアル

 

- 126 - 

field of the Web browser. If the LAN IP of the modem connected with your router is 

192.168.0.x, the default LAN IP of the router will automatically switch from 192.168.0.1 to 

192.168.1.1 to avoid IP conflict; in this case, please try 

3)  Log in to the router, click the “Forwarding” menu on the left of your browser, and click 

the "Virtual Servers" submenu. On the "Virtual Servers" page, click Add New, then on 

the “Add or Modify a Virtual Server” page, enter “80” into the blank next to the “Service 

Port”, and your IP address next to the “IP Address”, assuming 192.168.0.188 for an 

example, remember to Enable and Save. 

 

Figure A-9 Virtual Servers 

 

Figure A-10 Add or Modify a Virtual server Entry 

1)  Make sure the "Wireless Radio Band" is enabled. 

2)  Make sure that the wireless stations' SSID accord with the router's SSID. 

3)  Make sure the wireless stations have right KEY for encryption when the router is 

encrypted. 

4)  If the wireless connection is ready, but you can’t access the router, check the IP Address 

of your wireless stations.