TP-Link Technologies Co. Ltd. WN951N ユーザーズマニュアル
TL-WN951N
Wireless N PCI Adapter
22
Figure 3-11
3. Highlight the profiles to add to auto profile selection, and click
Add
. The profile will appear
in the Auto Selected Profiles box.
4. Highlight a profile in the Auto Selected Profiles box.
5. Click
5. Click
Move Up
or
Move Down
as appropriate.
Note:
The first profile in the Auto Selected Profiles box has highest priority, while the last profile has the
lowest priority.
lowest priority.
6. Click
OK
.
7. Check the
Auto Select Profiles
checkbox on the
Profile Management
tab (shown in
Figure 3-2).
Note:
When auto profile selection is enabled by checking
Auto Select Profiles
on the
Profile
Management
tab, the client adapter will scan for an available network. The profile with the
highest priority and the same SSID as one of the found networks will be used to connect to the
network. If the connection fails, the client adapter will try the next highest priority profile that
matches the SSID until an available network is found.
network. If the connection fails, the client adapter will try the next highest priority profile that
matches the SSID until an available network is found.
3.3 Diagnostics
The
Diagnostics
tab of the TP-LINK Draft N Wireless Client Utility (11NWCU) provides buttons
used to retrieve receiving and transmitting statistics. The Diagnostics tab does not require any
configuration.
configuration.
The Diagnostics tab lists the following receiving and transmitting diagnostics for frames
received or transmitted by the wireless network adapter:
received or transmitted by the wireless network adapter:
Multicast frames transmitted and received
Broadcast frames transmitted and received
Broadcast frames transmitted and received