Allen & Heath Xone:464 XONE 464 ユーザーズマニュアル
製品コード
XONE 464
28
XONE:464 User Guide
External Input
An external input is provided in addition to the mono and stereo
channels. Use this either as another input to the mix or as an external
monitor source only.
channels. Use this either as another input to the mix or as an external
monitor source only.
INPUTS A pair of ¼” TRS jacks accepts a line level stereo or mono
source. For stereo sources plug into the L and R inputs. For mono
sources plug into the L input only leaving the R input unplugged. In
this case the mono signal is normalled through the R input socket.
Operating level is –10dBV as standard but may be changed to +4dBu
by resoldering an internal link.
source. For stereo sources plug into the L and R inputs. For mono
sources plug into the L input only leaving the R input unplugged. In
this case the mono signal is normalled through the R input socket.
Operating level is –10dBV as standard but may be changed to +4dBu
by resoldering an internal link.
ROUTING SWITCHES Two switches route the signal to Mix1, Mix2,
both or none. These are tamperproof to prevent accidental operation
during performance. Decide how the external inputs are to be used.
There are two main applications:
both or none. These are tamperproof to prevent accidental operation
during performance. Decide how the external inputs are to be used.
There are two main applications:
Mix Input To connect additional stereo or mono sources to either or
both Mix1 and Mix2. For example, you could return the processed
output from an effects device such as reverb back into the mix, you
could accept an input from a submixer to feed the same speaker
system, or you could replay a recording through the PA. Cue the
source by pressing the monitor selector EXT switch. The signal is
monitored pre-level. Use a pointed object such as a pen to select the
routing switches as required.
both Mix1 and Mix2. For example, you could return the processed
output from an effects device such as reverb back into the mix, you
could accept an input from a submixer to feed the same speaker
system, or you could replay a recording through the PA. Cue the
source by pressing the monitor selector EXT switch. The signal is
monitored pre-level. Use a pointed object such as a pen to select the
routing switches as required.
Monitor Only Input To return sources to the monitor selector for
monitoring only. With both switches in the up position the signal feeds
the monitor source selector and is not affected by the level control.
This is the case when the input is used for monitoring only and should
not feed the main mix, for example checking your recording of the mix.
The tamperproof underpanel routing switches prevent accidental
operation. If the switch were accidentally pressed during recording
the signal would route back on itself and feed back electronically.
monitoring only. With both switches in the up position the signal feeds
the monitor source selector and is not affected by the level control.
This is the case when the input is used for monitoring only and should
not feed the main mix, for example checking your recording of the mix.
The tamperproof underpanel routing switches prevent accidental
operation. If the switch were accidentally pressed during recording
the signal would route back on itself and feed back electronically.
LEVEL The rotary control adjusts the level of the external input to
Mix1 or Mix2 or both as selected on the routing switches above. Note
that it does not affect the feed to the monitor selector. The control
adjusts from fully off to a maximum +6dB boost. The normal 0
operating position is marked.
Mix1 or Mix2 or both as selected on the routing switches above. Note
that it does not affect the feed to the monitor selector. The control
adjusts from fully off to a maximum +6dB boost. The normal 0
operating position is marked.
MONITOR SELECT Press EXT in the monitor select switch bank to
listen to the input in the headphones and local booth monitor. The
signal level is displayed on the monitor meters. The EXT selection is
automatically overridden when any Aux monitor or Cue switch is
pressed. Pressing EXT overrides the Mix1 and Mix2 selection. For
example, you could be listening to the music mix with MIX1 pressed,
then press EXT to check the recording. You do not need to release
MIX1 first.
listen to the input in the headphones and local booth monitor. The
signal level is displayed on the monitor meters. The EXT selection is
automatically overridden when any Aux monitor or Cue switch is
pressed. Pressing EXT overrides the Mix1 and Mix2 selection. For
example, you could be listening to the music mix with MIX1 pressed,
then press EXT to check the recording. You do not need to release
MIX1 first.